Greim Tarraing Càball SCIC
Roinn-seòrsa
Greim tarraing càball, Greim tarraing ròpa uèir, Greim tarraing mogaill uèir, Stocainn tarraing càball, Greim mogaill uèir, Greim tarraing giùlanadair, Greim càball, Greim tarraing meadhanach-dhleastanais, Greim tarraing trom-dhleastanais, Greim Kellems, Greim basgaid, Greim mogaill, Greim aon-shùil, Greim dà-shùil
Iarrtas
Toraidhean co-cheangailte
Paramadair Greim Tarraing Càball
Greimean Tarraing Càball SCIC: Air an innleachadh airson stàladh càball sàbhailte, èifeachdach
Tha greimean tarraing càball SCIC a’ toirt seachad fuasgladh earbsach, àrd-neart airson stàladh sàbhailte chàbaill cumhachd, cian-chonaltraidh, agus snàithleach optaigeach. Air an innleachadh airson tagraidhean dùbhlanach, tha iad air an togail bho ròpa uèir stàilinn ghalbhanaichte àrd-inbhe le neart tensile àrd, a’ dèanamh cinnteach à seasmhachd agus strì an aghaidh sgrìobadh as motha rè tarraing càball fon talamh agus stàladh càball san adhar.
Tha sinn a’ tabhann raon farsaing de sheòrsaichean is mheudan a fhreagras air riatanasan pròiseict sam bith. Tha greimean mogaill ioma-chruthach stoidhle basgaid agus greimean tarraing làidir trom-dhleastanais anns an loidhne thoraidhean againn, gach fear air a dhealbhadh airson raointean trast-thomhas càball sònraichte agus crìochan luchd obrach (WLL). Tha seo a’ dèanamh cinnteach à freagarachd foirfe airson a h-uile càil bho bhith a’ giùlan càball thar astar fada ann an tar-chur cumhachd gu bhith a’ tarraing phìoban mionaideach ann an togail agus stàladh càball fo-stèisean.
Bidh gach greim SCIC a’ dol tro dheuchainnean is sgrùdadh teann gus coinneachadh ri inbhean eadar-nàiseanta teann. Bho dhearbhadh stuthan amh gu dearbhadh neart brisidh mu dheireadh, tha am pròiseas dearbhaidh càileachd againn a’ gealltainn gu bheil gach aonad a’ lìbhrigeadh coileanadh agus sàbhailteachd cunbhalach, neo-shleamhnach air an làrach obrach. Air an dealbhadh airson ath-chleachdadh thar iomadh pròiseact, is e greimean tarraing càball SCIC an roghainn earbsach dha cunnradairean dealain agus proifeiseantaich goireis air feadh an t-saoghail a dh’ fheumas greim air am faod iad earbsa a chur.
Freagarrach airson a bhith a’ tarraing air ceann càball, cleachd ròpa uèir stàilinn ghalbhanaichte teth-bhog, càball aon-shreath, ioma-shreath, ioma-shreang todhar, càball air a chleachdadh air luchd trom.
| Modail | Raon Meud (mm) | Fad mogaill mm | Fad iomlan mm | Neart Brisidh | |
| KN | KG | ||||
| TGK-18 | 13-18 | 540 | 766 | 19.6 | 2000 |
| TGK-25 | 18-25 | 800 | 1020 | 24.5 | 2500 |
| TGK-37 | 25-37 | 850 | 1140 | 34.3 | 3500 |
| TGK-50 | 37-50 | 900 | 1194 | 58.8 | 6000 |
| TGK-63 | 50-63 | 920 | 1220 | 78.4 | 8000 |
| TGK-75 | 63-75 | 920 | 1220 | 78.4 | 8000 |
| TGK-88 | 75-88 | 920 | 1270 | 88.2 | 9000 |
| TGK-101 | 88-101 | 1100 | 1420 | 107.8 | 11000 |
| TGK-114 | 101-114 | 1200 | 1560 | 117.6 | 12000 |
| TGK-127 | 115-127 | 1350 | 1750 | 132.3 | 13500 |
| TGK-152 | 124-152 | 1500 | 1960 | 147 | 15000 |
| TGK-180 | 153-180 | 1850 | 2300 | 196 | 20000 |
| TGK-230 | 180-230 | 1950 | 2300 | 196 | 20000 |
| TGK-280 | 230-280 | 2000 | 2350 | 196 | 20000 |
| TGK-320 | 280-320 | 2200 | 2450 | 196 | 20000 |
Air a chleachdadh ann an tarraing ceann càball, airson greim càball luchd rathaid meadhanach, uèir, càball a tharraing.
| Modail | Raon Meud (mm) | Fad mogaill mm | Fad iomlan mm | Neart briseadh | |
| KN | KG | ||||
| TG-050-24 | 13-18 | 520 | 726 | 19.6 | 2000 |
| TG-075-24 | 18-25 | 600 | 813 | 24.5 | 2500 |
| TG-100-24 | 25-37 | 600 | 840 | 34.3 | 3500 |
| TG-150-24 | 37-50 | 600 | 850 | 58.8 | 6000 |
| TG-200-24 | 50-63 | 620 | 915 | 78.4 | 8000 |
| TG-250-24 | 63-75 | 620 | 915 | 78.4 | 8000 |
| TG-300-24 | 75-88 | 620 | 970 | 88.2 | 9000 |
| TG-350-24 | 88-101 | 660 | 1016 | 107.8 | 11000 |
| TG-400-24 | 101-114 | 700 | 1170 | 117.6 | 12000 |
| TG-450-24 | 115-127 | 900 | 1310 | 132.3 | 13500 |
| TG-500-24 | 124-152 | 1100 | 1540 | 147 | 15000 |
| TG-550-24 | 153-180 | 1150 | 1610 | 196 | 20000 |
| TG-600-24 | 180-230 | 1300 | 1700 | 196 | 20000 |
| TG-650-24 | 230-280 | 1450 | 1850 | 196 | 20000 |
| TG-700-24 | 280-320 | 1600 | 2000 | 196 | 20000 |
Air a chleachdadh ann an tarraing ceann càball, airson greim càball luchd rathaid meadhanach, uèir, càball a tharraing.
| Modail | Raon Meud (mm) | Fad mogaill (mm) | Fad iomlan (mm) | Neart Brisidh | |
| KN | KG | ||||
| TG-050-36 | 13-18 | 540 | 766 | 19.6 | 2000 |
| TG-075-36 | 18-25 | 800 | 1020 | 24.5 | 2500 |
| TG-100-36 | 25-37 | 850 | 1140 | 34.3 | 3500 |
| TG-150-36 | 37-50 | 900 | 1194 | 58.8 | 6000 |
| TG-200-36 | 50-63 | 920 | 1220 | 78.4 | 8000 |
| TG-250-36 | 63-75 | 920 | 1220 | 78.4 | 8000 |
| TG-300-36 | 75-88 | 920 | 1270 | 88.2 | 9000 |
| TG-350-36 | 88-101 | 1100 | 1420 | 107.8 | 11000 |
| TG-400-36 | 101-114 | 1200 | 1560 | 117.6 | 12000 |
| TG-450-36 | 115-127 | 1350 | 1750 | 132.3 | 13500 |
| TG-500-36 | 124-152 | 1500 | 1960 | 147 | 15000 |
| TG-550-36 | 153-180 | 1850 | 2300 | 196 | 20000 |
| TG-600-36 | 180-230 | 1950 | 2300 | 196 | 20000 |
| TG-650-36 | 230-280 | 2000 | 2350 | 196 | 20000 |
| TG-700-36 | 280-320 | 2200 | 2450 | 196 | 20000 |
Air a chleachdadh ann an tarraing ceann càball, airson greim càball luchd rathaid meadhanach, uèir, càball a tharraing.
| Modail | Raon Meud (mm) | Fad mogaill mm | Fad iomlan mm | Neart briseadh | |
| KN | KG | ||||
| TGM-16 | 13-18 | 270 | 350 | 11.76 | 1200 |
| TGM-22 | 18-25 | 390 | 500 | 11.8 | 1205 |
| TGM-30 | 25-37 | 550 | 680 | 15.68 | 1600 |
| TGM-45 | 37-50 | 650 | 800 | 29.4 | 3000 |
| TGM-60 | 50-63 | 730 | 900 | 43.12 | 4500 |
| TGM-75 | 63-75 | 900 | 1100 | 49 | 5000 |
| TGM-90 | 75-88 | 1030 | 1270 | 58.8 | 6000 |
| TGM-100 | 88-101 | 1130 | 1372 | 58.8 | 6000 |
| TGM-110 | 101-114 | 1330 | 1560 | 80.36 | 8200 |
| TGM-125 | 115-127 | 1500 | 1750 | 112.7 | 11500 |
| TGM-135 | 124-152 | 1730 | 1960 | 122.5 | 12500 |
| TGM-160 | 153-180 | 2000 | 2300 | 147 | 15000 |
| TGM-200 | 180-230 | 2000 | 2300 | 196 | 20000 |
| TGM-250 | 230-280 | 2000 | 2300 | 196 | 20000 |
| TGM-280 | 280-320 | 2200 | 2350 | 196 | 20000 |
Air a chleachdadh airson ceann càball a tharraing, a’ cleachdadh fighe uèir bhog aon-shreath, seòrsa aon-sùla.
Buannachdan: sùbailte, càball furasta tron chuairt-rathaid.
Greim càball luchd rathaid mheadhanach, uèirichean, slaodadh, ann an diosc dealain no càball tarraing.
| Modail | Raon Meud (mm) | Fad mogaill mm | Fad iomlan mm | Neart briseadh | |
| KN | KG | ||||
| MG-5 | 4-6 | 140 | 200 | 0.981 | 100 |
| MG-10 | 7-12 | 200 | 270 | 5.88 | 600 |
| MG-15 | 13-18 | 270 | 350 | 8.82 | 900 |
| MG-20 | 19-24 | 300 | 400 | 11.8 | 1200 |
| MG-30 | 25-34 | 420 | 550 | 15.6 | 1592 |
| MG-45 | 35-48 | 520 | 650 | 29.4 | 3000 |
| MG-60 | 49-60 | 680 | 820 | 39.2 | 4000 |
| MG-75 | 60-75 | 800 | 950 | 43.2 | 4408 |
| MG-90 | 75-90 | 950 | 1120 | 49 | 5000 |
| MG-105 | 90-105 | 970 | 1290 | 49 | 5000 |
| MG-135 | 110-135 | 1200 | 1350 | 58.8 | 6000 |
| MG-150 | 130-150 | 1320 | 1500 | 58.8 | 6000 |
| MG-180 | 150-180 | 1500 | 1750 | 78.4 | 8000 |
| MG-230 | 180-230 | 1850 | 2100 | 78.4 | 8000 |
| MG-280 | 230-280 | 1950 | 2200 | 88.2 | 9000 |
| MG-320 | 280-320 | 2000 | 2300 | 88.2 | 9000 |
| Modail | Raon Meud mm | Fad iomlan mm | Luchd teannachaidh | Luchd a’ briseadh | ||
| N | KG | N | KG | |||
| DSG-6 | 4-6 | 220 | 392 | 40 | 981 | 100 |
| DSG-9 | 6-9 | 223 | 392 | 40 | 981 | 100 |
| DSG-12 | 9-12 | 280 | 785 | 80 | 1961 | 200 |
| DSG-15 | 12-15 | 400 | 1079 | 110 | 2697 | 275 |
| DSG-18 | 15-18 | 440 | 1667 | 170 | 4168 | 425 |
| DSG-25 | 19-25 | 440 | 2452 | 250 | 6129 | 625 |
| DSG-31 | 25-31 | 462 | 3432 | 350 | 8581 | 875 |
Tha an stuth air a dhèanamh de stàilinn gun smal 316, ferrule copair casg, le meuran, a tha an aghaidh caitheamh, agus a tha an aghaidh creimeadh. Air a dhealbhadh airson càball mara trom-dhleastanais.
| Modail | Raon Meud (mm) | Fad mogaill mm | Fad iomlan mm | Neart briseadh | |
| KN | KG | ||||
| wr-6 | 4-6 | 400 | 550 | 5.88 | 600 |
| wr-8 | 6-9 | 500 | 650 | 5.88 | 600 |
| WT-10 | 9-12 | 500 | 700 | 8.82 | 900 |
| WT-16 | 13-18 | 600 | 800 | 29.4 | 3000 |
| WT-20 | 16-21 | 800 | 1000 | 39.2 | 4000 |
| WT-25 | 22-28 | 1100 | 1180 | 68.6 | 7000 |
| WT-30 | 29-36 | 1200 | 1300 | 68.6 | 7000 |
| WT-40 | 37-45 | 1300 | 1400 | 98 | 10000 |
| WT-50 | 45-55 | 1400 | 1550 | 117.6 | 12000 |
| WT-60 | 56-68 | 1550 | 1720 | 117.6 | 12000 |
| WT-75 | 69-80 | 1650 | 1880 | 117.6 | 12000 |
| WT-90 | 80-95 | 1750 | 1980 | 147 | 15000 |
| WT-115 | 88-101 | 1800 | 2060 | 176.4 | 18000 |
| wr-130 | 101-114 | 1900 | 2150 | 176.4 | 18000 |
| WT-155 | 115-127 | 2100 | 2300 | 196 | 20000 |
| wr-180 | 124-152 | 2200 | 2500 | 196 | 20000 |
| WT-220 | 153-180 | 2300 | 2600 | 196 | 20000 |
| WT-230 | 180-230 | 2400 | 2700 | 196 | 2000 |
| WT-280 | 230-280 | 2550 | 2850 | 196 | 2000 |
| WT-320 | 280-320 | 2700 | 2950 | 196 | 2000 |
Air a chleachdadh sa mhòr-chuid airson ròpa uèir no càball a chur na àite, nuair a thathar ga chleachdadh, càball ùr ceangailte ri aon cheann, càball sean ceangailte ri aon cheann, agus càball sean a chur na àite le bhith a’ cuairteachadh a’ chraein no an inneal-togail.
| Modail | Raon Meud (mm) | Fad iomlan mm | Neart briseadh | |
| KN | KG | |||
| RA-18 | 13-18 | 1100 | 15.88 | 1600 |
| RA-25 | 18-25 | 1320 | 19.6 | 2000 |
| RA-30 | 25-34 | 1720 | 34.3 | 3500 |
| RA-40 | 35-42 | 1920 | 41.16 | 4200 |
| RA-50 | 42-50 | 2060 | 50.96 | 5200 |
| RA-55 | 50-60 | 2420 | 58.88 | 6000 |
| RA-70 | 60-75 | 2650 | 78.4 | 8000 |
| RA-80 | 75-90 | 3320 | 88.2 | 9000 |
| RA-100 | 90-110 | 3650 | 88.2 | 9000 |
| RA-120 | 110-130 | 3900 | 88.2 | 9600 |
Air a chleachdadh sa mhòr-chuid airson ròpa uèir no càball a chur na àite, nuair a thathar ga chleachdadh, càball ùr ceangailte ri aon cheann, càball sean ceangailte ri aon cheann, agus càball sean a chur na àite tro bhith a’ cuairteachadh a’ chraein no an inneal-togail. Faodar a chleachdadh cuideachd airson càball, pìob, pìob agus mar sin air adhart a dhìon.
| Modail | Raon Meud (mm) | Fad iomlan mm | Neart briseadh | |
| KN | KG | |||
| RB-18 | 13-18 | 1100 | 15.88 | 1600 |
| RB-25 | 18-25 | 1320 | 19.6 | 2000 |
| RB-30 | 25-34 | 1720 | 34.3 | 3500 |
| RB-40 | 35-42 | 1920 | 41.16 | 4200 |
| RB-50 | 42-50 | 2060 | 50.96 | 5200 |
| RB-55 | 50-60 | 2420 | 58.88 | 6000 |
| RB-70 | 60-75 | 2650 | 78.4 | 8000 |
| RB-85 | 75-90 | 3320 | 88.2 | 9000 |
| RA-100 | 90-110 | 3650 | 88.2 | 9000 |
| RB-120 | 110-130 | 3900 | 88.2 | 9600 |
| RB-140 | 127-152 | 3900 | 107.8 | 11000 |
| RB-160 | 153-180 | 3900 | 107.8 | 11000 |
| RB-200 | 180-230 | 3900 | 107.8 | 11000 |
| RB-250 | 230-280 | 3900 | 107.8 | 11000 |
| RB-280 | 280-320 | 3900 | 107.8 | 11000 |
Fighe aon-shreath no ioma-shreath, faodaidh ceann a’ chàball caitheamh a-mach, stàladh is ceangal goireasach, greim tarraing càball dà thaobh, freagarrach airson càball trom-dhleastanais a tharraing is a leigeil sìos sa mheadhan.
| Modail | Raon Meud (mm) | Fad mogaill mm | Fad iomlan mm | Neart briseadh | |
| KN | KG | ||||
| MGT-4 | 4-6 | 140 | 190 | 1.96 | 200 |
| MGT-8 | 6-9 | 230 | 260 | 2.94 | 300 |
| MGT-12 | 9-12 | 300 | 360 | 5.71 | 580 |
| MGT-16 | 13-18 | 500 | 600 | 19.6 | 2000 |
| MGT-22 | 18-25 | 520 | 620 | 24.5 | 2500 |
| MGT-30 | 25-37 | 550 | 720 | 34.3 | 3500 |
| MGT-45 | 37-50 | 620 | 800 | 58.8 | 6000 |
| MGT-60 | 50-63 | 750 | 980 | 78.4 | 8000 |
| MGT-75 | 63-75 | 900 | 1180 | 78.4 | 8000 |
| MGT-90 | 75-88 | 950 | 1220 | 88.2 | 9000 |
| MGT-100 | 88-101 | 1000 | 1320 | 107.8 | 11000 |
| MGT-110 | 101-114 | 1180 | 1450 | 117.6 | 12000 |
| MGT-125 | 115-127 | 1250 | 1620 | 132.3 | 13500 |
| MGT-135 | 124-152 | 1460 | 1880 | 176.4 | 18000 |
| MGT-160 | 153-180 | 1780 | 2200 | 176.4 | 18000 |
| MGT-200 | 180-230 | 1950 | 2300 | 196 | 20000 |
| MGT-250 | 230-280 | 2000 | 2350 | 196 | 20000 |
| MGT-280 | 280-320 | 2100 | 2450 | 196 | 20000 |
Le bhith a’ cleachdadh fighe uèir bhog aon-shreath, faodaidh ceann a’ chàball caitheamh a-mach, stàladh agus ceangal goireasach, freagarrach airson tarraing is leigeil às air càball meadhanach mòr sa mheadhan.
| Modail | Raon Meud (mm) | Fad mogaill mm | Fad iomlan mm | Neart briseadh | |
| KN | KG | ||||
| SG-6 | 4-6 | 145 | 200 | 3.92 | 400 |
| SG-9 | 6-9 | 160 | 220 | 5.88 | 600 |
| SG-12 | 9-12 | 190 | 260 | 8.82 | 900 |
| SG-18 | 13-18 | 220 | 300 | 11.8 | 1200 |
| SG-25 | 18-25 | 250 | 360 | 15.6 | 1592 |
| SG-30 | 25-34 | 350 | 450 | 29.4 | 3000 |
| SG-40 | 35-48 | 490 | 600 | 39.2 | 4000 |
| SG-55 | 49-60 | 600 | 720 | 43.2 | 4408 |
| SG-70 | 60-75 | 780 | 920 | 49 | 5000 |
| SG-85 | 75-90 | 980 | 1150 | 49 | 5000 |
| SG-100 | 90-115 | 1120 | 1320 | 58.8 | 6000 |
| SG-120 | 110-135 | 1250 | 1450 | 58.8 | 6000 |
| SG-135 | 132-152 | 1450 | 1700 | 78.4 | 8000 |
| SG-160 | 153-180 | 1650 | 1950 | 88.2 | 9000 |
| SG-200 | 180-230 | 1700 | 2000 | 117.6 | 12000 |
| SG-250 | 230-280 | 1800 | 2100 | 147 | 15000 |
| SG-280 | 280-320 | 1950 | 2250 | 196 | 2000 |
Faodaidh ceann a’ chàbaill caitheamh a-mach, stàladh furasta, stèidhichte, togail, Tha an stuth air a dhèanamh de stàilinn gun smal 316, ferrule copair casg, Le thimble, an aghaidh caitheamh, an aghaidh creimeadh. Air a dhealbhadh airson càball mara luchdan trom.
| Modail | Raon Meud (mm) | Fad mogaill mm | Fad iomlan mm | Neart briseadh | |
| KN | KG | ||||
| SGT-6 | 4-6 | 400 | 550 | 5.88 | 600 |
| SGT-8 | 6-9 | 500 | 650 | 5.88 | 600 |
| SGT-10 | 9-12 | 500 | 700 | 8.82 | 900 |
| SGT-16 | 13-18 | 600 | 800 | 29.4 | 3000 |
| SGT-20 | 16-21 | 800 | 1000 | 39.2 | 4000 |
| SGT-25 | 22-28 | 1100 | 1180 | 68.6 | 7000 |
| SGT-30 | 29-36 | 1200 | 1300 | 68.6 | 7000 |
| SGT-40 | 37-45 | 1300 | 1400 | 98 | 10000 |
| SGT-50 | 45-55 | 1400 | 1550 | 117.6 | 12000 |
| SGT-60 | 56-68 | 1550 | 1720 | 117.6 | 12000 |
| SGT-75 | 69-80 | 1650 | 1880 | 117.6 | 12000 |
| SGT-90 | 80-95 | 1750 | 1980 | 147 | 15000 |
| SGT-115 | 88-101 | 1800 | 2060 | 176.4 | 18000 |
| SGT-130 | 101-114 | 1900 | 2150 | 176.4 | 18000 |
| SGT-155 | 115-127 | 2100 | 2300 | 196 | 20000 |
| SGT-180 | 124-152 | 2200 | 2500 | 196 | 20000 |
| SGT-220 | 153-180 | 2300 | 2600 | 196 | 20000 |
| SGT-230 | 180-230 | 2400 | 2700 | 196 | 20000 |
| SGT-280 | 230-280 | 2550 | 2850 | 196 | 20000 |
| SGT-320 | 280-320 | 2700 | 2950 | 196 | 20000 |
Figheadaireachd aon-shreath no ioma-shreath, faodaidh ceann a’ chàball caitheamh a-mach, stàladh is ceangal goireasach, freagarrach airson slaodadh is leigeil às air càball meadhanach no trom-dhleastanas.
| Modail | Raon Meud (mm) | Fad mogaill mm | Fad iomlan mm | Neart briseadh | |
| KN | KG | ||||
| SGA-6 | 4-6 | 140 | 190 | 1.96 | 200 |
| SGA-10 | 6-9 | 230 | 260 | 2.94 | 300 |
| SGA-15 | 9-12 | 300 | 360 | 5.71 | 580 |
| SGA-18 | 13-18 | 500 | 580 | 19.6 | 2000 |
| SGA-25 | 18-25 | 520 | 620 | 24.5 | 2500 |
| SGA-30 | 25-34 | 550 | 680 | 34.3 | 3500 |
| SGA-40 | 35-48 | 620 | 780 | 58.8 | 6000 |
| SGA-55 | 49-60 | 750 | 980 | 78.4 | 8000 |
| SGA-70 | 60-75 | 900 | 1180 | 78.4 | 8000 |
| SGA-85 | 75-90 | 950 | 1220 | 88.2 | 9000 |
| SGA-100 | 90-115 | 1000 | 1320 | 107.8 | 11000 |
| SGA-120 | 110-135 | 1180 | 1450 | 117.6 | 12000 |
| SGA-140 | 130-150 | 1250 | 1620 | 132.3 | 13500 |
| SGA-160 | 150-180 | 1650 | 1950 | 147 | 15000 |
| SGA-200 | 180-230 | 1700 | 2000 | 196 | 20000 |
| SGA-250 | 230-280 | 1800 | 2100 | 196 | 20000 |
| SGA-280 | 280-320 | 1950 | 2250 | 196 | 20000 |
Faodaidh ceann a’ chàbaill caitheamh a-mach, stàladh furasta, stèidhichte, togail, Tha an stuth air a dhèanamh de stàilinn gun smal 316, ferrule copair brùite, Le thimble, an aghaidh caitheamh, an aghaidh creimeadh. Air a dhealbhadh airson càball fon uisge le cus luchd.
| Modail | Raon Meud (mm) | Fad mogaill mm | Fad iomlan mm | Neart briseadh | |
| KN | KG | ||||
| WTG-6 | 4-6 | 400 | 550 | 5.88 | 600 |
| WTG-8 | 6-9 | 500 | 650 | 5.88 | 600 |
| V\ATG-1O | 9-12 | 500 | 700 | 8.82 | 900 |
| WG-16 | 13-18 | 600 | 800 | 29.4 | 3000 |
| WTG-20 | 16-21 | 800 | 1000 | 39.2 | 4000 |
| WIG-25 | 22-28 | 1100 | 1300 | 68.6 | 7000 |
| V\AIG-30 | 29-36 | 1200 | 1420 | 68.6 | 7000 |
| WTG-40 | 37-45 | 1300 | 1550 | 98 | 10000 |
| V\ATG-50 | 45-55 | 1400 | 1650 | 117.6 | 12000 |
| WTG-60 | 56-68 | 1550 | 1900 | 117.6 | 12000 |
| V\ATG-75 | 69-80 | 1650 | 2080 | 117.6 | 12000 |
| WTG-90 | 80-95 | 1750 | 2150 | 147 | 15000 |
| WTG-115 | 88-101 | 1800 | 2220 | 176.4 | 18000 |
| WTG-130 | 101-114 | 1900 | 2350 | 176.4 | 18000 |
| WTG-155 | 115-127 | 2100 | 2560 | 196 | 20000 |
| WTG-180 | 124-152 | 2200 | 2680 | 196 | 20000 |
| WTG-220 | 153-180 | 2300 | 2780 | 196 | 20000 |
| WTG-230 | 180-230 | 2400 | 2700 | 196 | 20000 |
| WTG-280 | 230-280 | 2550 | 2850 | 196 | 20000 |
| WTG-320 | 280-320 | 2700 | 2950 | 196 | 20000 |
Le bhith a’ cleachdadh iomadh snàthainn de ròpa uèir stàilinn ghalbhanaichte teth-bhog airson fighe, air a chleachdadh airson ceann càball a shlaodadh, faodaidh e rothladh 360 ceum, a’ leigeil ma sgaoil torsion a’ chàball no an ròpa uèir.
| Modail | Raon Meud (mm) | Fad mogaill mm | Fad iomlan mm | Neart briseadh | |
| KN | KG | ||||
| KT-18 | 13-18 | 500 | 580 | 19.6 | 2000 |
| KT-25 | 18-25 | 520 | 620 | 24.5 | 2500 |
| KT-30 | 25-34 | 550 | 680 | 34.3 | 3500 |
| KT-40 | 35-48 | 620 | 780 | 58.8 | 6000 |
| KT-55 | 49-60 | 750 | 980 | 78.4 | 8000 |
| KT-7O | 60-75 | 900 | 1180 | 78.4 | 8000 |
| KT-85 | 75-90 | 950 | 1220 | 88.2 | 9000 |
| KT-100 | 90-115 | 1000 | 1320 | 107.8 | 11000 |
| KT-120 | 110-135 | 1180 | 1450 | 117.6 | 12000 |
| KT-140 | 130-150 | 1250 | 1620 | 132.3 | 13500 |
Freagarrach airson càbaill le sònrachaidhean beaga, faodar an inneal-biadhaidh, ceann slaodadh a thionndadh, gus an torsion a leigeil ma sgaoil.
| Modail | Raon Meud (mm) | Fad iomlan mm | Neart briseadh | |
| KN | KG | |||
| MX-6 | 4-6 | 220 | 0.392 | 40 |
| MX-9 | 6-9 | 223 | 0.392 | 40 |
| MX-12 | 9-12 | 280 | 0.49 | 50 |
| MX-15 | 12-15 | 400 | 0.49 | 50 |
| MX-18 | 15-18 | 440 | 0.882 | 90 |
| MX-24 | 18-24 | 404 | 1.176 | 120 |
| MX-31 | 25-31 | 462 | 1.176 | 120 |
Greim càball rothlach, faodaidh e tionndadh a’ chàball a leigeil ma sgaoil, faodar snàithleanan air a’ cheangail a cheangal gu dìreach ris an uidheamachd mhòr.
| Modail | Raon Meud (mm) | Fad iomlan mm | Neart briseadh | |
| KN | KG | |||
| GK-05 | 4-6 | 220 | 1.176 | 120 |
| GK-08 | 6-9 | 223 | 1.56 | 160 |
| GK-10 | 9-12 | 280 | 1.96 | 200 |
| GK-15 | 12-15 | 400 | 2.15 | 220 |
| GK-18 | 15-18 | 440 | 3.33 | 340 |
| GK-25 | 18-25 | 404 | 4.11 | 420 |
| GK-30 | 25-34 | 462 | 4.41 | 450 |
| GK-40 | 35-42 | 520 | 5.88 | 600 |
| GK-50 | 43-52 | 680 | 5.88 | 600 |
| GK-60 | 53-65 | 800 | 7.84 | 800 |
| GK-75 | 66-80 | 850 | 8.64 | 880 |
Freagarrach airson càbaill bheaga, inneal-biadhaidh, faodar ceann slaodadh a thionndadh, Leig às an torsion, Faodaidh ceann a’ chàbaill caitheamh a-mach, stàladh goireasach, stèidhichte agus togail
| Modail | Raon Meud (mm) | Fad iomlan mm | Neart briseadh | |
| KN | KG | |||
| MS-6 | 4-6 | 220 | 0.392 | 40 |
| MS-9 | 6-9 | 223 | 0.392 | 40 |
| MS-12 | 9-12 | 280 | 0.49 | 50 |
| MS-15 | 12-15 | 400 | 0.49 | 50 |
| MS-18 | 15-18 | 440 | 0.882 | 90 |
| MS-24 | 18-24 | 404 | 1.176 | 120 |
| MS-31 | 25-31 | 462 | 1.176 | 120 |
Fàg do theachdaireachd:
A bheil ùidh agad ann a bhith a’ sgrùdadh mar a dh’ fhaodadh ar bathar is ar seirbheisean buannachd a thoirt don ghnìomhachas agad? Cuir fios chun sgioba againn an-diugh — tha sinn an seo gus do chuideachadh
Roinneadh sòisealta:
Slabhraidhean Lìon Iasgaich, Slabhraidhean Togail Osha, Slabhraidhean Togail Crane, Ceanglaichean slabhraidhean, Slabhraidhean Togail Druma, Slabhraidhean agus Slingean,
Fàg do theachdaireachd:
- English
- French
- German
- Portuguese
- Spanish
- Russian
- Japanese
- Korean
- Arabic
- Irish
- Greek
- Turkish
- Italian
- Danish
- Romanian
- Indonesian
- Czech
- Afrikaans
- Swedish
- Polish
- Basque
- Catalan
- Esperanto
- Hindi
- Lao
- Albanian
- Amharic
- Armenian
- Azerbaijani
- Belarusian
- Bengali
- Bosnian
- Bulgarian
- Cebuano
- Chichewa
- Corsican
- Croatian
- Dutch
- Estonian
- Filipino
- Finnish
- Frisian
- Galician
- Georgian
- Gujarati
- Haitian
- Hausa
- Hawaiian
- Hebrew
- Hmong
- Hungarian
- Icelandic
- Igbo
- Javanese
- Kannada
- Kazakh
- Khmer
- Kurdish
- Kyrgyz
- Latin
- Latvian
- Lithuanian
- Luxembou..
- Macedonian
- Malagasy
- Malay
- Malayalam
- Maltese
- Maori
- Marathi
- Mongolian
- Burmese
- Nepali
- Norwegian
- Pashto
- Persian
- Punjabi
- Serbian
- Sesotho
- Sinhala
- Slovak
- Slovenian
- Somali
- Samoan
- Scots Gaelic
- Shona
- Sindhi
- Sundanese
- Swahili
- Tajik
- Tamil
- Telugu
- Thai
- Ukrainian
- Urdu
- Uzbek
- Vietnamese
- Welsh
- Xhosa
- Yiddish
- Yoruba
- Zulu
- Kinyarwanda
- Tatar
- Oriya
- Turkmen
- Uyghur